Thiết Kế Sàn Sườn Có Bản Một Phương Bê Tông Cốt Thép Toàn Khối - Nguyễn Trường Thắng, 114 Trang

In practice, slabs are the horizontal and structural components in buildings that separate storey from storey and roof. They can also be used as shallow foundation, cover or wall panels in liquid-containing tanks, technical floors in utility stations, desk slabs in bridges, etc.
Cast-in-situ reinforced concrete (RC) slabs supported by beams or walls, so-called slab-and-beam systems, are commonly used in civil and industrial construction owing to the following advantages: (i) Good load bearing capacity; (ii) Good stiffness; (Hi) Easy for maintenance; (iv) Good fire resistance; (v) Flexible for both indoor and outdoor use purposes, etc.
In terms of structural behavior, the slab-and-beam system having four-side supported slab panels can be categorized into two types depending on aspect ratio, which is the ratio between the longer and the shorter sides of the rectangular slab panel. If the aspect ratio is higher than 2.0, the system can be referred to as one-way slabs, otherwise it will work as two-way slabs.

• Design Of Cast-In-Situ Reinforced Concrete One-Way Slabes - Thiết Kế Sàn Sườn Có Bản Một Phương Bê Tông Cốt Thép Toàn Khối
• NXB Xây Dựng 2017
• Nguyễn Trường Thắng
• 114 Trang
• File PDF-SCAN
• Ngôn ngữ: Tiếng Anh

Link download
https://thuvien.huce.edu.vn/opac/DmdInfo.aspx?dmd_id=10774
https://drive.google.com/file/d/1Q-Y4hfQLRf1kvbUcWCIZxiGPN6vIhe6x
https://drive.google.com/drive/folders/1yLBzZ1rSQoNjmWeJTZ3WGQHg04L1